Overview

Compliance Services (IQ/OQ)

Maintain compliance and audit-readiness in regulated environments for your critical analytical instruments and laboratory equipment by taking advantage of our comprehensive and cost-effective suite of qualification services (IQ/OQ), temperature mapping, and calibration services to maintain performance, save time, and mitigate risk.

23244_IQOQ
Centrifuges and Vacuum Concentrators

Centrifuges and Vacuum Concentrators

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include*:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for climatic chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

* Calibration services may vary by equipment and model.

Constant-Temperature Incubators, Ovens, and Furnaces

Constant-Temperature Incubators, Ovens, and Furnaces

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include*:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

* Calibration services may vary by equipment and model.

Controlled-Environment CO₂ Incubators and Environmental Chambers

Controlled-Environment CO₂ Incubators and Environmental Chambers

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include*:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

* Calibration services may vary by equipment and model.

Cold Storage, Refrigerators, and Freezers

Cold Storage, Refrigerators, and Freezers

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include*:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

* Calibration services may vary by equipment and model.

Biosafety Cabinets

Biosafety Cabinets

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include*:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

* Calibration services may vary by equipment and model.

Water Purification Systems

Water Purification Systems

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include*:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

* Calibration services may vary by equipment and model.

Shakers

Shakers

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include*:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

* Calibration services may vary by equipment and model.

Remote Monitoring Systems

Remote Monitoring Systems

IQ

  • Unpacking, Assembly and Installation: Verifies that the equipment, manuals, supplies and any other accessories arrived undamaged as specified in the sales order. Verifies equipment is assembled and installed and any initial diagnostics tests have been performed. Any abnormal event(s) observed during assembly and installation have been documented.
  • Utility, Facility and Environment: Verifies that the installation site satisfactorily meets manufacturer-specified environmental requirements.

OQ

  • System Component Information: Detailed configuration information for each system component have been recorded.
  • OQ Limits: Record a list of manufacturer recommended limits for ensuring that the system is operating as expected.
  • Equipment Operational Tests and Results: Test important equipment functions to verify that the equipment operates as intended by the manufacturer and required by the user. This is a group of selected important equipment parameters for testing according to the intended use of the equipment.

Key tests: door ajar, power failure, CO₂ concentration and temperature levels

Calibration

Unity Lab Services offers a range of equipment-specific services for all of your laboratory equipment. Some of these services include*:

Determination of:

  • Temperature accuracy
  • Humidity accuracy
  • Temperature uniformity and stability and deviation to the set point
  • Repeatability, corner load, linearity and accuracy

Measurements taken at appropriate points based on equipment type, for example:

  • Bath measurements taken at the center of the bath
  • Center of the chamber at the ICH couples for Climatic Chambers

Adjustments as necessary and as possible.

All testing completed according to equipment specific controls and ranges.

Contact us for specific information or a quote.

* Calibration services may vary by equipment and model.

Contact Us

Vielen Dank für Ihr Interesse, mit uns in Kontakt zu treten. Bitte füllen Sie das beiliegende Formular aus, um Ihre Anfrage zu senden. Ein Mitglied des Fisher Scientific-Teams wird sich so bald wie möglich mit Ihnen in Verbindung setzen.



unity-lab-services

About Unity™ Lab Services

Unity™ Lab Services provides worldclass service solutions to support your equipment. Our comprehensive service portfolio was designed to meet the needs of your lab.

• Equipment service plans
• On-demand services
• Compliance services
• Preventive maintenance
• Start-up services

Managing services for your equipment has never been easier. Services Central is a centralized online platform, in selected European countries, that enables you and your colleagues to request service, view service request status and service history, check service plan or warranty coverage, access manuals, and more.