Lauda™ PRO RP 250 E Cooling Heating Circulator with SEV 1011 and SEV 5934/2 Plug

Beschreibung

• Bright and high-contrast graphic OLED display
• Integrated programmer, one program with max. 20 segments
• Operation with Cursor- and Softkeys
• EasyUse system for simple operation of whole unit
• SelfCheck Assistant for system diagnosis
• Command console can be detached and used as remote control
• Tower design with small footprint
• Low filling volume enables rapid changes in temperature
• Bath vessel made of stainless steel (insulated, with overflow and drain tap)
• LAUDA Varioflex pump (pressure/suction) with eight selectable levels, connections rear USB and Ethernet interface equipped as standard
• Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
• Fully electronic continuous controller with PID action for internal and external control
• PowerAdapt system for the use of maximum possible amount of heat permitted by power supply system
• Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids
• SmartCool system for energy-saving digital cooling management including compressor on-off control
• Hybrid cooling system: (heat removal complementary with cooling water)
• Utilizes natural refrigerants
• Technical Features:
  • Working temperature range: -50 to 200 °C
  • Ambient temperature range: 5 to 40 °C
  • Temperature stability: 0.05 ± K
  • Heater power max: 2.5 kW
  • Power consumption max: 3.7 kW
  • Power consumption: 16 A
  • Pump pressure max: 0.7 bar
  • Pump flow rate pressure max: 22 L/min
  • In/outlet connection thread (outside): M16x1
  • In/outlet Ø olives: 13 mm
  • Filling volume min: 2.4 L
  • Filling volume max: 4.4 L
  • Overall dimensions (W x D x H): 300 x 430 x 675 mm
  • Power supply: 230 V, 50 Hz
  • Power plug: power cord with plug (SEV 1011, SEV 5934/2)
  • Cooling capacity (pump stages):
    • 20 °C (8), Ethanol; 1.5 kW
    • 10 °C (8), Ethanol; 1.44 kW
    • 0 °C (8), Ethanol; 1.2 kW
    • -10 °C (8), Ethanol; 0.84 kW
    • -20 °C (4), Ethanol; 0.54 kW
    • -30 °C (4), Ethanol; 0.29 kW
    • -40 °C (4), Ethanol; 0.11 kW
    • -45 °C (4), Ethanol; 0.04 kW
    • -50 °C (2), Ethanol; 0.02 kW
  • Standard accessory:
    • Two screw caps, two closing plugs, two nipples 13 mm for pump connectors, two nipples 10 mm with screw cap G 3/8 for cooling water