missing translation for 'onlineSavingsMsg'
Learn More
Learn More
Lauda™ PRO RP 245 E Cooling Heating Circulator with SEV 1011 and SEV 5934/2 Plug
Thermostatzirkulator mit neuester Mikroprozessor-Technologie und integriertem Kühlsystem
Marke: Lauda™ L000184
Dieser Artikel kann nicht zurückgegeben werden.
Rückgaberichtlinie anzeigen
Beschreibung
- Bright and high-contrast graphic OLED display
- Integrated programmer, one program with max. 20 segments
- Operation with Cursor- and Softkeys EasyUse system for simple operation of whole unit
- SelfCheck Assistant for system diagnosis
- Command console can be detached and used as remote control
- Tower design with small footprint
- Low filling volume enables rapid changes in temperature
- Bath vessel made of stainless steel (insulated, with overflow and drain tap)
- LAUDA Varioflex pump (pressure/suction) with eight selectable levels, connections rear USB and Ethernet interface equipped as standard
- Retrofittable for upgrading with interface (RS 232/485, Profibus; EtherCAT; analogue or contact modules)
- Fully electronic continuous controller with PID action for internal and external control
- PowerAdapt system for use of maximum possible amount of heat permitted by power supply system
- Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids
- SmartCool system for energy-saving digital cooling management including compressor on-off control
- Hybrid cooling system: heat removal complementary with cooling water
- Utilizes natural refrigerants
- Working temperature range: -45 to 200 °C
- Ambient temperature range: 5 to 40 °C
- Temperature stability: 0.05 ± K
- Heater power max: 2.5 kW
- Power consumption max: 3.7 kW
- Power consumption: 16 A
- Pump pressure max: 0.7 bar
- Pump flow rate pressure max: 22 L/min
- In/outlet connection thread (outside): M16x1
- In/outlet Ø olives: 13 mm
- Filling volume min: 2.4 L
- Filling volume max: 4.4 L
- Overall dimensions (W x D x H): 300 x 430 x 675 mm
- Power supply: 230 V, 50 Hz
- Power plug: power cord with plug (SEV 1011, SEV 5934/2)
- Cooling capacity (pump stages):
- 20 °C (8) Ethanol; 0.8 kW
- 10 °C (8) Ethanol; 0.8 kW
- 0 °C (8) Ethanol; 0.8 kW
- -10 °C (8) Ethanol; 0.53 kW
- -20 °C (4) Ethanol; 0.34 kW
- -30 °C (4) Ethanol; 0.15 kW
- -35 °C (4) Ethanol; 0.09 kW
- -40 °C (4) Ethanol; 0.04 kW
- -45 °C (2) Ethanol; 0.01 kW
- Standard accessory:
- Two screw caps, two closing plugs, two nipples 13 mm for pump connectors, two nipples 10 mm with screw cap G 3/8 for cooling water
Spezifikation
| 230 V |